Consulta de Guías Docentes



Academic Year/course: 2023/24

558 - Bachelor's Degree in Industrial Design and Product Development Engineering

25878 - Computer Aided Design II


Syllabus Information

Academic year:
2023/24
Subject:
25878 - Computer Aided Design II
Faculty / School:
110 - Escuela de Ingeniería y Arquitectura
Degree:
558 - Bachelor's Degree in Industrial Design and Product Development Engineering
ECTS:
6.0
Year:
3
Semester:
First semester
Subject type:
Compulsory
Module:
---

1. General information

The subject seeks to deepen in the use of advanced parametric 3D CAD tools that allow them to support the technical development of products based on standardization.

It is intended that in this subject students will be able to create 3D virtual models involving more complex geometries, with advanced curves and smoother shapes, as well as the design of modular products in which different configurations are presented.

The student will capture the geometric definition of a design in the form of a three-dimensional virtual model, being able to generate the technical and graphic documentation of the product definition (plans, renders, animations). It will provide flexibility in the design process, opening it to possible modifications, redesigns, alternatives, analysis and model checks. The products designed in this subject may be the starting point for further treatments and complementary technical analyses such as finite element analysis, tolerance calculations, manufacturingprocesses , etc.

2. Learning results

The student must demonstrate the following results in order to pass this subject:

1. Ability to generate geometric models using 3D CAD surface modeling tools in the environment of formal and technical development of a product and an industrial design project.

2. Ability to use computer programs to obtain realistic images.

3. Knowledge of the different formats and types of CAD models and possible integration between them.

4. Knowledge of the different formats and types of CAD modeling programs and their files, and possible ways of import / export.

5. Critical and analytical skills based on observation, to be applied to presentations, modifications and simulations of the models generated, and also for their subsequent application, within the context of a project methodology, to tests of various types.

3. Syllabus

Content of the subject:

The content of the subject is structured in the following topics:

1.- Introduction to Solidworks

2.- Advanced operations

3.- Parameterization

4.- Part configurations

5.- Assemblies

6.- Assembly configuration

7.- Intelligent components

8.- Drawings

9.- Surfaces

10- Visualization

11- Animation

4. Academic activities

The total teaching load of the subject is 6 ECTS credits with an equivalence of 150 hours for the student, of which:

  • 15 hours of lectures (15 sessions of 1 hour)
  • 45 hours of practical class (15 sessions of 3 hours)
  • 20 hours of personal study.
  • 65 hours of personal work.
  • 5 h of evaluation tests.

5. Assessment system

The evaluation of the student's learning results will be based on the assessment of the following evaluation activities by means of a global test, on the date fixed by the Center within the examination period, and which will consist of the following parts:

  • Practical exam of the subject with a weight of 50%.
  • Development of individual and/or group work, which must be delivered on the day of the global test and with a weight of 50%.

Each of these activities must be passed individually in order to pass the subject.

The subject exam must be passed in order to pass the subject. When it is subdivided in several differentiated parts, the student must pass each one of them independently to pass the subject.

The work may include projects to be carried out individually or in groups. These assignments will be assigned by the teacher in the first weeks of the term. Each of the individual papers must be passed independently for to be averaged with the rest of the sections. The weight assigned to each of them will appear in the statements.

The different parts of exams and papers that have been passed in the first exam session will be kept for the following following call.


Curso Académico: 2023/24

558 - Graduado en Ingeniería en Diseño Industrial y Desarrollo de Producto

25878 - Diseño Asistido por Ordenador II


Información del Plan Docente

Año académico:
2023/24
Asignatura:
25878 - Diseño Asistido por Ordenador II
Centro académico:
110 - Escuela de Ingeniería y Arquitectura
Titulación:
558 - Graduado en Ingeniería en Diseño Industrial y Desarrollo de Producto
Créditos:
6.0
Curso:
3
Periodo de impartición:
Primer semestre
Clase de asignatura:
Obligatoria
Materia:
---

1. Información básica de la asignatura

La asignatura busca profundizar en el manejo de herramientas avanzadas de CAD 3D paramétrico que le permitan dar soporte al desarrollo técnico de productos en base a la normalización.

Se pretende que en esta asignatura los estudiantes sean capaces de realizar modelos virtuales en 3D en los que intervengan geometrías más complejas, con curvas avanzadas y formas más suaves, así como el diseño de productos modulares en los que se presenten diferentes configuraciones.

El alumno plasmará la definición geométrica de un diseño en forma de modelo virtual tridimensional, pudiendo a partir de dichos modelos, generar la documentación técnica y gráfica de definición del producto (planos, renders, animaciones). Aportará flexibilidad en el proceso de diseño abriendo este a posibles modificaciones, rediseños, planteamiento de alternativas, análisis y comprobaciones de los modelos. Los productos diseñados en esta asignatura podrán ser punto de partida de posteriores tratamientos y análisis técnicos complementarios como el análisis por elementos finitos, cálculos de tolerancias, procesos de fabricación, etc, 

 

2. Resultados de aprendizaje

El estudiante deberá demostrar haber alcanzado los siguientes resultados para superar esta asignatura:

1. Capacidad de generar modelos geométricos utilizando herramientas de modelado de superficies CAD 3D en el entorno del desarrollo formal y técnico de un producto y un proyecto de diseño industrial.
2. Capacidad de utilizar programas informáticos para la obtención de imágenes de representación realista.
3. Conocimiento de los diferentes formatos y tipos de modelo CAD y posible integración entre los mismos.
4. Conocimiento de los diferentes formatos y tipos de programas de modelado CAD y sus archivos, y posibles modos de importación / exportación.
5. Capacidad crítica y de análisis basada en la observación, para aplicarla a presentaciones, modificaciones y simulaciones de los modelos generados, y también para su posterior aplicación, dentro del contexto de una metodología proyectual, a ensayos de diversos tipos.

3. Programa de la asignatura

Contenido de la asignatura:

El contenido de la asignatura se estructura en los siguientes temas:

1.- Introducción a Solidworks

2.- Operaciones avanzadas

3.- Parametrización

4.- Configuraciones de pieza

5.- Ensamblajes

6.- Configuración de ensamblajes

7.- Componentes inteligentes

8.- Dibujos

9.- Superficies

10- Visualización

11- Animación

4. Actividades académicas

El total de la carga docente de la asignatura es de 6 créditos ECTS con una equivalencia de 150 horas para el estudiante, de las cuales:

  • 15 horas de clase magistral (15 sesiones de 1 hora)
  • 45 horas de clase práctica (15 sesiones de 3 horas)
  • 20 horas de estudio personal.
  • 65 horas de trabajo personal.
  • 5 h de pruebas de evaluación.

5. Sistema de evaluación

La evaluación de los resultados del aprendizaje del estudiante estará basada en la valoración de las siguientes actividades de evaluación mediante la realización de una prueba global, en la fecha fijada por el Centro dentro del periodo de exámenes, y que constará de las siguientes partes:

  • Examen práctico de la asignatura con un peso del 50%.
  • Desarrollo de trabajos individuales y/o de grupo, que deberán ser entregados el día de la prueba global y con un peso del 50%.

Cada una de estas actividades deberá ser aprobada de forma individual para superar la asignatura.

El examen de la asignatura deberá ser aprobado para superar la asignatura. Cuando el mismo esté subdividido en varias partes diferenciadas, el alumno deberá superar cada una de ellas de forma independiente para aprobar la asignatura.

Los trabajos podrán incluir proyectos a realizar de forma individual o en grupo. Estos trabajos serán asignados por el profesor en las primeras semanas del curso. Cada uno de los trabajos individuales deberá de ser superado de forma independiente para promediar con el resto de apartados. El peso asignado a cada uno de ellos figurará en los enunciados.

Las diferentes partes de exámenes y trabajos que hayan sido aprobados en la primera convocatoria se conservarán para la convocatoria siguiente.